86 switch socket wiring should be strictly in accordance with the requirements

Release time:

2024-05-13

The 86 type of switch socket actually refers to its specifications, because the specification of the 86 type socket is 86 by 86, so people call it the 86 type socket. So we all know what are the requirements to be strictly followed when wiring 86 switch sockets?

The 86 type of switch socket actually refers to its specifications, because the specification of the 86 type socket is 86 by 86, so people call it the 86 type socket. So we all know what are the requirements to be strictly followed when wiring 86 switch sockets?

86 switch socket wiring should be strictly in accordance with the requirements as follows:

Socket wiring in the situation we do not particularly understand the recommendations do not do it yourself, so as not to hurt yourself, to be responsible for their own life safety moment. The bottom edge of the door switch box is 1.2 m-1 from the ground. The 4m side distance from the door sleeve line needs to be more than 70mm. Switches in some positions shall be installed according to the requirements of the owner. Safety sockets shall be used when the bottom edge of the socket is less than 1.8m from the ground.

The environment in some places at home will be relatively humid. At this time, the socket wiring should be sealed to protect the socket. The installation height of the socket should be ≥ 1.5m. In the children's room, the safe socket should be adopted. When calculating the load, all sockets without fixed load body are calculated according to 1000 watts. Ordinary socket with 2.5mm2 copper core wire. Allowable deviation of panel verticality ≤ 1mm.

As long as it is a socket, it is necessary to connect the zero line in the direction facing the panel, the right phase line and the three holes are connected to the upper ground line. In addition, exposed copper wires exceeding 1mm are not allowed in the box. Switches and sockets should avoid modeling walls. Switches should be convenient to use after installation. Switches in the same room should be installed on the same horizontal line and arranged in a more commonly used and rarely used order.

Previous Page

Meisun | Hidden Splash-proof Socket-New Products release

Switch socket installation pay attention to what?

Next Page