Switch socket installation pay attention to what?

Release time:

2024-05-13

The quality of the switch socket determines its safety, and also directly affects the safety of the family's electricity. so we know switch socket installation pay attention to what?

The quality of the switch socket determines its safety, and also directly affects the safety of the family's electricity. so we know switch socket installation pay attention to what?

Switch socket installation precautions are as follows:

1. When installing the switch socket in the room, it is necessary to control its height, which is generally about 1.3m ~ 1.5m. If it is to be installed on the edge of the door, it needs to be about 0.15m ~ 0.20m from the door frame. Note that the switch socket is not to be installed behind the door, which is of little use.

2, if installed in the bathroom, kitchen, or balcony switch socket, then it is necessary to choose the splash-proof type, so as to ensure sufficient safety. But it should be noted that in the bathroom bathtub, bathroom kitchen balcony water, kitchen gas meter stove and other locations, is not installed switch socket.

3. For high-power electrical appliances used indoors, it is necessary to pay attention to the matching socket, and the socket should be three-hole, and it should be grounded to ensure the safety of use. Moreover, for high-power electrical appliances, the power cord is relatively thick, so try to match the socket with switch, so there is no need to plug in and out of the socket.

4. If a three-hole socket is installed, it should be installed according to relevant specifications. For example, the upper side should be connected with the ground wire, the left side should be connected with the neutral wire, and the right side should be connected with the neutral wire, so as to ensure normal use. And the ordinary socket requires a 2.5 mm² power cord, and high-power wires need to be equipped with a 4 mm².

A switch socket is a device used to connect electrical equipment and provide power supply. It is usually composed of a socket and an additional switch, which can be inserted into the plug of electrical equipment, and the power-on and power-off of the electrical equipment are controlled by the switch.











Previous Page

86 switch socket wiring should be strictly in accordance with the requirements

Classification and Wiring Method of Wall Switches in Double Control Engineering

Next Page