Wall switch plug wire heating what are the reasons?

Release time:

2024-05-13

The wall switch is used to connect and disconnect the circuit and control the switch of the lighting lamp. Electrical products in the narrow sense usually refer only to switches and sockets in building electrical. so we know what are the reasons for wall switch plug wire fever?

The wall switch is used to connect and disconnect the circuit and control the switch of the lighting lamp. Electrical products in the narrow sense usually refer only to switches and sockets in building electrical. so we know what are the reasons for wall switch plug wire fever?

The reasons for the heating of the plug wire of the wall switch are as follows:
1. Poor contact between the plug and the 86 socket, coupled with the high load power, causes the plug wire to heat up. Such as electric kettle, electric iron, etc.
2. The thread ends in the new plug are loose, which is caused by rough production process and other reasons.
3. The new plug wire is used for a long time, and the insulation performance is reduced (or the plug wire is loose).

Wall switch processing method: when buying a new plug wire, you may as well disassemble the plug for inspection and tighten the inner thread end (note that the thread end cannot be short-circuited). when the old plug wire is seriously heated, if the thread end is not loose, you should replace it with a new wire.

The wall switch controls the lamp switch. In a broad sense, electrical products cover a wide range and generally point to end users to provide power electrical control.

Previous Page

Classification and Wiring Method of Wall Switches in Double Control Engineering

What are the wiring methods of the wall switch?

Next Page